A unique load-bearing reinforced floor system that provides a solid, fully engineered and cross-braced floor for residential and commercial construction.

Hebel PowerFloor+ panels are available in a range of sizes

DP profile

Caged steel mesh, coated with an anti-corrosion protection layer for maximum strength and durability

The PowerFloor+ system consists of extremely strong panels, containing steel mesh coated with an anti-corrosion protection layer for maximum strength and durability. The panels fit snugly together to form a smooth and strong floor, without the need to wait for concrete to cure and with limited propping.

The interlocking of the PowerFloor+ panels with grout creates a full fire seal between panels, which – combined with Hebel’s fire-resistant properties – means it can achieve Fire Resistance Levels of up to 3 hours without relying on ceiling systems.

Load-bearing and spanning up to 5.85m without floor framing or joists, PowerFloor+ is lightweight – the lighter loads assisting to reduce slabs, columns and footings, and can be made to length resulting in less wastage.

The PowerFloor+ system achieves excellent thermal performance, ensuring thermal ratings are easily met, and once finished it is able to be covered with a variety of common floor coverings, making it the ideal choice for residential or commercial floors.


Strong and secure

Fast construction times

Risk minimisation

Easy fire-rating compliance

Easy acoustic compliance

Maximised floorspace

Design efficiency

Product versatility

High sustainability values

Superior insulation qualities


Commercial & Industrial

Product Sizes

Hebel PowerFloor+ for Commercial Floors

PowerFloor+ Made to Order (MTO) – Commercial Flooring (150mm to 250mm) Non Cuttable – AVAILABLE ON REQUEST ONLY

  • Up to 6000x600x150mm DP Profile
  • Up to 6000x600x175mm DP Profile
  • Up to 6000x600x200mm DP Profile
  • Up to 6000x600x225mm DP Profile
  • Up to 6000x600x250mm DP Profile

Note: All Made to Order products are: Made to Confirmed Order Only – Minimum Quants Apply – Lead Times Apply – Engineering Checks Apply
Note: Maximum panel lengths for a given thickness in Commercial Flooring are governed by strict engineering guidelines.
Note: To ensure a given thickness or span can be manufactured for a given load and/or FRL please refer to the Hebel Technical Manual
Note: Panels are non-cuttable i.e made to length


To learn more about our products and systems, search the categories below to view our range of Hebel guides, manuals, brochures and files.

View all Downloads
  • Brochures
  • General Technical Manuals
  • MSDS Files

Commercial and Industrial Product and Range Guide

General Technical Manuals

Hebel Tech Man - Pt1 Products


The CSR Hebel Technical Manual has been prepared as a source of information to provide general guidance to consultants.
The contents of the Technical Manual are provided with consideration to and in accordance with the relevant Australian standards, legislative requirements and building regulations. It is the responsibility of the user to ensure that the information provided in this manual is appropriate and similarly conforms to the relevant New Zealand Standards, legislative requirements and building regulations.

Use of Technical Manual for Hebel AAC Block Structures
In New Zealand, AAC block structures require specific engineering design. Such design must be undertaken by a suitably qualified structural engineer. Furthermore, specification of control joint requirements & locations in Hebel AAC block structures must be assessed and verified by the structural engineer with consideration to the information within the Technical Manual and to the relevant masonry block Standards and Codes of Practice existing in New Zealand, specifically with reference to seismic design.


Privacy Policy | © 2023 Copyright Hebel.